345_V, 3452_V, 368_N & 99_V Door Bottom Sweeps
MPN: 345_V, 3452_V, 368_N & 99_V
Finishes: A, B, BDG, C, D, G, PW, SN
please request lead time
Door bottom seals consist of a variety of solutions for sealing a door to the threshold or floor surface.
Door sweeps are surface applied to the face of a door. They are used commonly on the exterior of outswing doors. Door sweep channels are available in several styles with materials based on your application. The inserts for door sweeps allow customers to choose from Eco-V, neoprene, nylon brush and pile depending on the application.
345_V
AVAILABLE FINISHES: A, BDG, C, D, G, PW
3452_V
AVAILABLE FINISHES: A, BDG, C, D, G, PW, SN
368_N
AVAILABLE FINISHES: C, D, G
99_V
AVAILABLE FINISHES: PA, PD, PG, PW
Finishes
A (Mill Finish Aluminium) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Clear Anodized) C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) PW (Painted White) SN (Satin Nickel Anodized)
For disabled people to have independent access through single or double swing doors, the opening force, when measured at the leading edge of the door must not exceed 30N between 0º and 30º from closed and 22.5N thence until 60º. It is likely that this performance requirement might not be achievable for some locations where closer forces and the influence of seals used for smoke sealing or acoustic performance requirements will add to operating forces.
We provide an extensive range of threshold drop seals that may be used for smoke sealing purposes (where the under door gap
exceeds 3mm) or for sound attenuating, light tight or other performance requirements. All our threshold drop seals incorporate Pemko’s patented low friction ‘Feather Touch’ technology resulting in minimal operating forces.
Optimum performance is achieved when the seal is adjusted to grip a 50-70 gsm piece of paper that can be withdrawn without tearing. Unless otherwise specified, the seal element consists of a closed cell sponge neoprene insert to Pemko’s patented ‘tri-fin’ design. The seal maintains pliability down to -70°F. The sealing element benefits from good ‘memory’ and durability characteristics. Other seal element options are available where specified.
