3185_V Door Shoe
MPN: 3185_V
Finishes: A, D
please request lead time
Door bottom seals consist of a variety of solutions for sealing a door to the threshold or floor surface.
These door bottoms may be used in different applications. Some of these shapes may be used as meeting stile gasketing. Refer to Astragals and Meeting Stiles for more information on such applications.
3185_V
AVAILABLE FINISHES: A, D
Finishes
A (Mill Finish Aluminium) D (Dark Bronze Anodized)
For disabled people to have independent access through single or double swing doors, the opening force, when measured at the leading edge of the door must not exceed 30N between 0º and 30º from closed and 22.5N thence until 60º. It is likely that this performance requirement might not be achievable for some locations where closer forces and the influence of seals used for smoke sealing or acoustic performance requirements will add to operating forces.
We provide an extensive range of threshold drop seals that may be used for smoke sealing purposes (where the under door gap
exceeds 3mm) or for sound attenuating, light tight or other performance requirements. All our threshold drop seals incorporate Pemko’s patented low friction ‘Feather Touch’ technology resulting in minimal operating forces.
Optimum performance is achieved when the seal is adjusted to grip a 50-70 gsm piece of paper that can be withdrawn without tearing. Unless otherwise specified, the seal element consists of a closed cell sponge neoprene insert to Pemko’s patented ‘tri-fin’ design. The seal maintains pliability down to -70°F. The sealing element benefits from good ‘memory’ and durability characteristics. Other seal element options are available where specified.
