4201S.915.US32D Surface Vertical Rod Device
4201S.915.US32D
Heavy Duty Surface Vertical Rod Device - (suits doors <915mm x 2134mm) Stainless Steel
In accordance with BS EN 1125: 2008 Annexe A (informative) the device should be installed with the touch bar normally at a height between 900mm and 1100mm from the finished floor level when the door is in the secure position. Where it is known that the majority of the occupants of the premises will be young children, it is acceptable to reduce the fixing height accordingly.
Trade Customers - Ask us about trade terms/prices.
- Device Functions - Ships ready for functions; EO, CE & KE
- Device Lengths - This device suits doors to 915mm, optional device suits doors to 1220mm
- Finishes - US32D (630) Stainless Steel. Alternative finish - ALM Sprayed Silver on Carbon Steel
- Stainless steel door strikes (top & bottom) supplied standard
- Stainless steel double door strike (2-649-5011) supplied standard
- Fasteners - Includes fixings for both metal and timber doors - optional thru' bolt through fixings
- Top Latch Bolt - Stainless steel 15mm throw with automatic dead latching
- Bottom Latch Bolt - Stainless steel 15mm throw - held retracted while the door is in motion
Optional Trim (for Outside Access)
add suffix -
CE - Lever w. Euro profile cylinder escutcheon
EO - Exit Only
KE - Key in Lever on round rose
NL-OP - Rim Cylinder (Optional Pull Required)
UK Fire Certification in accordance with EN 1634-1:2014 (timber)
EN 1125: 2008
Hager 4200 Series Exit Hardware
Best suited to heavy duty situations on perimeter and internal doors where functional grade safe egress in panic emergency situations is a requirement.
Exit devices should not require any person to have prior knowledge of their function – you just push and go. Hager offers exit devices in rim and surface vertical rod versions in both stainless steel and silver painted finishes to suit the vast majority of door sizes and applications.