SLR4 Actuator & Transmitter - (RF) Low Profile

SLR4

Actuator & Transmitter - (RF) Low Profile, Surface Mounted 

The push plate includes an integrated transmitter primarily for manually switching automated entrances. These switches can be incorporated into any automated or access control system where larger, easily operable switches are required.

Trade Customers - Ask us about trade terms/prices. 

For manual activation (single or double doors) specify SLR4 actuators and accessories as follows:

SLR4 – Actuator & Transmitter (Push To Open)

Actuators can be supplied (to special order) with a number of standard engraved designs.

SLR4.BLANK – Actuator & Transmitter (No engraving)
SLR4.WC – Actuator & Transmitter (Push to Open w. Wheelchair Symbol)

All engraved designs including those incorporating the wheelchair symbol are blue infill.

• Max voltage at the contacts - 250V ac
• Max current at the contacts - 6A dc - 15A ac
• Output contacts - Dry contacts (NO,NC, COM)
• Temperature range - Minus 30°C to plus 55°C
• Protection - IP52 (housing)
• Typical operating force - 0.45kg
• Size - 130mm dia. x 36mm projection
• Battery type (supplied with actuator transmitter) - 9-Volt (type 6LR61)
• ABS - Black (Surface Box)
• Transmitter fequency - 433 MHz

Any system using SLR switches or RF fobs requires at least one EAS (RF) Receiver

This receiver has a maximum detection distance of 25M (open field). The maximum number of programmable transmitter buttons per receiver is 100.

An activation control is used to switch an automatic door operator.The correct choice of control is critical since this will dictate how well the automated entrance works.The choice of switching method will regulate traffic flow and prescribe how and by whom the door is used.Your choice may also dictate whether the automated doors are classed as Low Energy Swing Doors or Powered Doors.

How to Make the Correct Choice. Initially the choice is two-fold between automatic activation and manual activation. Consideration should be given to the following: Traffic flow or density and traffic profile. High traffic situations, found in public or commercial buildings, require frequent unhindered switching of doors via microwave motion sensors (or detectors). Low traffic situations, usually residential applications or automated doors specifically designed for the exclusive use of those requiring automated access, can be controlled manually using actuators (or push pads).

High Traffic – Powered Doors
Switched automatically via Microwave Motion Sensors or Proximity Sensors such as Contact Mats

Low Traffic – Low Energy Swing Doors
Switched manually via Actuators (Push Pads) or Hand Held Fobs